AIBEILE Application Instructions
User manual - New Generation Watch
SUMMARY:
1 - Let's go!
2 - Installing the SIM card
3 - Installing AIBEILE on your phone
4 - Connection to AIBEILE
5 - Features of the watch
6 - Configuration
6.1 Working mode
6.2 Configuring call functions on AIBEILE
7 - Settings
7.1 Real-time tracking
7.2 Route logs
7.3 Security area
7.4 Remote listening (Voice monitoring)
7.5 Do Not Disturb Mode (Classroom Mode)
7.6 Remote photo
7.7 Clock and Alarm
7.8 WeChat
7.9 Pedometer
7.10 Making friends (Friendship)
7.11 Messages
7.12 Watch information
8 - Troubleshooting
9 - List of SMS commands
1 - Let's go! Before use
Before switching on: Please insert the SIM Card into a phone to deactivate the PIN Code request and then insert the SIM Card into the watch.
Turning the watch on: To turn the watch on and off, press the Power button for 3 seconds or more
Turn off the watch: You have two options:
On the watch, if no SIM is inserted you can press the On/Off button for 3 seconds or more
In AIBEILE: you go to Settings – REMOTE SHUTDOWN, Remote shutdown
Battery Charging: You need to insert the USB cable into a phone charger.
We recommend using a 5V 1A Charger.
Full charge of the battery is 2 - 3 hours maximum.
2 - Installing the SIM card
Important note:
Insert the Micro SIM card into the turned off watch, in the compartment on the side of the watch in the direction indicated in the image, until you hear a "CLICK" , the SIM card must not move in the slot.
If the watch is on please restart it then wait 30 seconds.
When the watch is turned off or out of mobile network range, geolocation will not work.
If you do not have a network, check that the SIM card is clipped in and in the right direction, then restart the watch, wait 1 minute, and try to go to an area with good network coverage.
Warranty – Important Note:
You will lose the warranty if the following points are not respected:
The watch is not water resistant; do not immerse the watch in water
Use only the cable provided to charge the watch.
Keep the watch away from any sources of flame, heat, high temperature or extreme environment.
Do not remove or damage the watch case.
3 - Installing AIBEILE on your phone
You can remotely monitor your new generation GPS Tracer via the AIBEILE application compatible with Android / iOS or a Computer
For Android:
You can download the app here or on Google Play Store by searching for “ Aibeile ”
For iPhone:
You can download the app here or on the Apple App Store by searching for “ Aibeile ”
For computer: To access the platform, you can use the following link: https://www.aibeile26.com/Login.aspx?language=en-us
Note: For connection with a computer, choose “ID No.” mode. And then enter your ID number and password
4 - Connection to AIBEILE
You press the << AIBEILE >> icon on your phone and choose the “connection with device ID” mode
Note :
The watch's 10-digit identifier (ID) can be found on the silver box label.
The default password is: 123456
NB It happens that the default password does not work, if you have a "password is incorrect" message you must request account activation, please simply contact customer service to have it activated here: info@smartwatchphone .Fr
5 - Features of the watch
6 - Configuration
6.1 Intervals between locations - Working mode
You can configure the GPS data loading interval in the work mode settings. This option is related to battery life.
Tracking every minute: Fast positioning mode, and autonomy is approximately 12 hours.
Monitoring every 10 minutes: Standard positioning mode, and autonomy is approximately 24 hours.
Monitoring every hour: Energy saving mode, and autonomy is approximately 36 hours.
Note :
The benchmarks used here do not take into account calls made from the watch, as call time drains the battery more quickly.
6.2 Configuring call functions on AIBEILE
1. Administrator Number: More - Settings - Administrator Number
Enter a phone number.
The device will send the alarm information to this number. These information are usually power drop alarm, safe zone alarm, SOS call alarm and other alarms.
2. Whitelist: More - Settings - Whitelist - Phone number configuration
A maximum of 5 contact numbers can be set, only whitelisted phone numbers can call this watch.
3. Telephone directory: More - Settings - Directory configuration - Name configuration
The directory can contain a maximum of 15 contacts. After setting up your phonebook, you can choose the phonebook icon on the watch via the watch's home screen.
4. SOS emergency calls: More - Settings - Emergency numbers
The device dials emergency numbers in a circular manner after pressing the Power/SOS button for 5 seconds.
It calls the second number if the first is not connected, then cycles continuously. (A voicemail may stop the process)
IMPORTANT NOTE: Whitelist, directory and family numbers can be configured in full phone number format (+33) or short number format (06).
5. Language and time zone configuration
You can configure the language and time here, Only numbers can be entered in the time zone. If the watch goes back 2 hours please enter 2 then validate. Then restart the watch and wait 1 minute.
If you have difficulty setting the time and date, you can also set them manually by sending an SMS from a phone to the watch. Please send this text message:
pw,123456,time,H24.MI.SS,date,YYYY.MM.DD#
For example:
pw,123456,time,10.30.59,date,2020.10.23#
6. Remote Shutdown: More - Settings
We recommend using the "Remote Power Off" function to turn off the watch.
However, you will also find this function in the device settings option.
7. Change password: More - Settings
For added security you can change the device password.
7 - Settings
7.1 Real-time tracking
There are three working modes (tracking mode). You can choose the working mode in the AIBEILE menu.
1. Fast mode (1 minute):
The device updates location information at 1 minute intervals, we do not suggest choosing fast mode, for daily tracking because this mode may quickly drain your battery sooner than standard mode.
However, if you use the Safe Zone feature, you must use this setting.
2. Standard mode (10 minutes):
The device updates location information at 10 minute intervals. (We suggest this option).
3. Power saving mode (1 hour):
The device updates location information at 1 hour intervals, power saving mode uses the battery at a slower rate.
Live tracking can not only track the location of the watch, but also that of your phone. You can click "+" and "-" to zoom in and zoom out on the map.
By tapping the icon you can force tracking and update the tracker information.
7.2 Route logs
You have the possibility to keep 3 months of information on the routes traveled. If two GPS locations are very close to each other in historical route data, the locations will merge.
7.3 Security area
AIBEILE - More - Settings - Security Zone, you can configure a Security Zone on the map.
If the watch enters or leaves the Security Zone, AIBEILE will receive the alarm information from the GPS tracking platform.
The frequency of alarms is related to the interval setting of the watch's real-time tracking, the smaller the positioning interval, the more frequent the alarm information can be.
If the Safety Zone is important to the wearer's safety, we recommend setting real-time tracking to fast mode (1 minute).
To set up the Security Zone, click on the upper right corner "+" under the main menu. The device will then automatically lock the current position as the center of the barrier, then you just need to adjust the radius by "+" "-" on the map
(Default radius is 100 meters; recommended radius is 500 meters).
You can save the settings by clicking "Save". The device will send a message when it leaves the Security Zone.
7.4 Remote listening (Voice monitoring)
You can remotely monitor the watch with Remote Listening (Voice monitoring). This feature will call the watch, and you will be able to listen and check the background sound or surroundings of the watch.
AIBEILE - More - Settings - enter the phone number of the watch - click ok (you wait a bit and the watch will call your phone and you can listen to the voices around the device).
7.5 Do Not Disturb Mode (Classroom Mode)
AIBEILE - More - Settings - Do Not Disturb,
You can set your start and end times with a maximum of 4 times within the time interval, so contacts cannot call the watch during these times.
7.6 Remote photo (only on SA28 model)
You can choose either by AIBEILE or by watch.
AIBEILE- Plus - Settings - Photo, from here you can send an instruction to the watch to take a photo remotely.
In [picture-view] - [Photo - view] you can enlarge photos and see information about the date and time of the photo.
WATCH - Click on the "camera" function of the watch, from here you can take photos or videos, they can be viewed or deleted from the Gallery.
7.7 Clock and Alarm
AIBEILE- Plus - Settings - Clock and Alarm
You have two categories: Daily Alarm and Set Alarm, the latter of which can be set according to your own needs)
7.8 WeChat
WeChat is the feature that allows you to exchange voice messages between AIBEILE and the watch
1. Send a voice message from AIBEILE to the watch:
AIBEILE – Voice - hold to speak - release to send message
2. Send a voice message from the watch to AIBEILE:
WATCH - Click on the “Voice” icon - hold to speak - release to send the message.
3. Send a photo of the watch to AIBEILE:
In the Chat message interface, click "+", then take photos, and send the photo to AIBEILE;
You can view the photo in: AIBEILE - More - Photos.
Note: the maximum length of a voice message is 15 seconds. The watch user can swipe up to cancel voice recording.
7.9 Pedometer
The pedometer is disabled by default, so you will need to manually enable this feature via AIBEILE.
AIBEILE - Plus - Pedometer - (Settings) - You need to set the tracking delay (this delay is set to turn on and off), the weight of the wearer and the step measurement.
You can check the number of steps on the watch using the “running man” symbol on the main screen.
Calorie and step counts can be viewed in AIBEILE.
7.10 Making friends (Friendship)
Click "Friend" in the watch interface, you can record your friend's GPS watch ID when the two watches touch.
The contact will be created after pairing the two watches, the icon will light up and display your new friend's ID.
Click the friend icon in the watch, and you can send messages, voice messages and photos.
To delete messages - Tap and hold the message for 3 seconds
To remove a friend - Tap and hold the friend icon for 3 seconds
7.11 Messages
All received messages can be found in the "Messages" tab, such as emergency calls, offline alarms, low battery alarms, Safe Zone alarms, etc.
(1) Network and Wireless connection:
WLAN: Open WLAN--search for WIFI hot-spots--enter password.
Bluetooth: After turning on Bluetooth, you will be able to transfer data such as photos using Bluetooth.
(2) Device: Display, Storage, Battery and applications.
(3) Personal: Security, Languages and input methods, Backup and Reset
(4) System: Date and time, About device and Clear cache.
Note: you can view the IMEI of a device via ABOUT - Show IMEI, The device number is
IMEI - 013347006230023
Device number - (623002) Last 6 digits
7.12 Positioning information
Positioning accuracy: by GPS + BeiDou is 5-20m; by WIFI is 20-200m; per LBS station is 200-2000m.
8 - Troubleshooting
Troubleshooting Check
Emergency calls only
1. Install the SIM card while the watch is turned off, otherwise it may only read emergency calls. Please restart the device.
2. The SIM card is correctly installed (chip side up). If not, turn off the watch and reseat it properly, then restart the watch.
3. PIN code cannot be deactivated, please install the SIM card into any cell phone to deactivate the PIN code, then put the SIM card back into the tracker.
4. APN is not configured, please configure APN
The 3G indicator light is not blue and the device is offline.
or there is no E next to the network bars.
The device supports three positioning modes:
1. GPS
2. WiFi
3. LBS
GPS is the first to work, if there is no GPS signal, the device switches to WIFI mode.
If there is no WIFI, the device will enter LBS mode.
You can force an update by tapping the tracking icon in version 3.0 (Live Tracking) Live Tracking.
If you are traveling by car, the device will not track the speed of the car because the location update settings do not update as quickly, but once the car stops or slows down, the device will catch up with her.
Once again, you can force an update by tapping the tracking icon in version 3.0 (Live Tracking) Live Tracking.
GPS is mainly for outdoor positioning, the accuracy is about 5-20 meters,
Wi-Fi positioning is primarily intended for indoor positioning; the accuracy is about 20 to 200 meters.
LBS positioning will be used if there is no GPS signal or Wi-Fi available; the accuracy is 200 - 2000 meters.
Again, the device could be in sleep mode. You can force an update by tapping the tracking icon in version 3.0 (Live Tracking) Live Tracking.
9 - List of SMS commands
Send below SMS command to tracker, pw,123456,ts#
You will then receive a response with the ID and IMEI of the watch.
Changing the time manually
Example to put this time: 08:45:00 and the date 09.11.2021: pw,123456,time,8.45.00,date,2021.09.11#
SMS CODE for location: pw,123456,url#
SMS CODE for GPS restart: pw,123456,cr#